It is the question that scares people most before they decide. A well-done smile makeover should not damage your teeth, but the full answer depends on the technique, the current state of your teeth and how it is done. I explain how much tooth each technique reduces, whether it can be removed, and what goes wrong when it is done poorly.
It is the question that scares people most before they decide, and it is a good question. The short answer is that a well-done smile makeover should not damage your teeth. The full answer depends on the technique, on the current state of your teeth and, above all, on how it is done. Let me walk you through all three.
Does a smile makeover damage your teeth?
It should not. Current techniques are very conservative with tooth structure when the tooth is healthy. The goal of a smile makeover is to improve the shape, color and size of the teeth to achieve a beautiful smile in harmony with your face, not to take away healthy tooth.
What does change from one technique to another is how much the tooth is touched, and I explain that below, technique by technique.
What happens to the fillings or crowns you already have?
When you arrive with previous restorations, the first step is to assess their condition. I always prefer to remove them. If I leave them unchecked, there may be decay underneath or a poor fit, meaning an edge that no longer seals well, and that ends up affecting the new restoration I place.
That is why, even if your teeth look fine from the outside, we check every restoration during the evaluation. Radiographs are not included in the evaluation fee, but they are always necessary: we never work blind. If you already have them, we use them, and if not, I give you an order to have them taken at the radiology center in the tower next door.
What are the three smile makeover techniques?
There are three ways to do a smile makeover, and each one treats the tooth differently. If you are deciding between resin and ceramic, the full comparison is in resin or ceramic veneers.
Ceramic veneers
They are planned digitally and fabricated from that design. The tooth needs a 0.5 mm preparation, which is the thickness of the material. Ceramic is the best material: it does not change color, it does not become porous and it is more resistant to fracture.
Milled resin veneers
The technique is similar to ceramic. It is also planned digitally and the entire fabrication process is digital, but the material is a dense resin that, in the long run, is stronger and more durable than direct composite. The preparation is also 0.5 mm.
Working digitally makes the process easier, more predictable and more precise. For ceramic and milled resin veneers, the result is planned in a digital design before a single tooth is touched, and instead of a putty impression we take an intraoral scan in the office.
Direct composite veneers
They are built directly on the tooth, in the office. With this technique the tooth is usually not touched: there is no preparation, only previous restorations are removed if there are any. It is part of minimally invasive cosmetic dentistry.
How much tooth is removed with each technique?
- Ceramic: 0.5 mm.
- Milled resin: 0.5 mm.
- Direct composite: no preparation. Only previous restorations are removed.
So yes, there are smile makeovers with no reduction: with direct composite the teeth are usually not touched. The material is applied over the tooth and only existing previous restorations are removed.
Why do ceramic and milled resin need a 0.5 mm reduction?
Because 0.5 mm is the thickness of the material. If that space is not prepared, the veneer sits on top of the tooth and two things happen: the veneers are bulky and the teeth look thick.
But the most important reason is another one: the fit. That space allows the veneer to adapt and seal perfectly at the margin, which is the edge where the veneer meets the tooth, right next to the gum. When the seal is perfect, the gum does not become inflamed.
What is the difference between the three, besides the material?
Apart from the materials and the technique, the investment changes. And the cost-benefit ratio is proportional to how long the veneers last: ceramic holds up best over time because it does not change color, does not become porous and resists fracture better. What decides the cost of your case is explained in how much a smile makeover costs in Medellín.
How long each one lasts is not a fixed number: it depends a great deal on your care, your hygiene and your habits.
And in all three, what matters most is the seal, the polish and the shine of the veneers. A good material that is poorly sealed or poorly polished does not give a good result.
Can a smile makeover be removed?
Yes, it can always be removed. There are laser techniques today that release the veneer, whether resin or ceramic, without using a bur and without cutting the tooth. It has an additional cost.
What goes wrong when a smile makeover is done poorly?
I have seen many poorly done smile makeovers, and two things go wrong most often.
The fit. When the veneer does not fit well at the edge, the gum shows it: it looks inflamed, red, it bleeds or there is bad breath. That is the consequence of a seal that was not perfect.
The esthetics. Teeth that do not look natural: like chewing gum pieces, extremely white and large, with no harmony with the face. A smile makeover should look like your own teeth, at their best.
When do I not recommend a smile makeover?
It has happened to me. I remember a patient whose teeth were completely healthy, with lovely shape, anatomy and color. The only thing missing was alignment.
I suggested aligning the teeth and whitening them, to keep his healthy teeth and still get a beautiful smile. He was set on the smile makeover and I did not do it. Most likely someone else did cut his teeth, because when teeth are out of position, making them look aligned requires cutting them to compensate for the spaces.
That is why sometimes the best smile does not need veneers.
How do you know which technique fits your case?
It comes out of the evaluation: I check your teeth, your restorations, your gums and your bite, with a 3D intraoral scan and radiographs. With that, I explain which technique I recommend and why, and I give you a written quote. If you first want to know whether your case is a candidate for a smile makeover, you can send photos of your smile on WhatsApp and the team will guide you. You can also see real results in clinical cases.
Frequently asked questions
▸Does a smile makeover damage your teeth?
It should not. Current techniques are very conservative with healthy tooth structure. Ceramic and milled resin veneers need a 0.5 mm preparation, which is the thickness of the material, and direct composite usually does not touch the tooth at all.
▸How much tooth is removed for veneers?
For ceramic and milled resin veneers, 0.5 mm. Direct composite does not require preparing the tooth: only previous restorations are removed, if there are any.
▸Can a smile makeover be removed?
Yes, it can always be removed. There are laser techniques today that release a resin or ceramic veneer without a bur and without cutting the tooth, at an additional cost.
▸Why are my gums inflamed around my veneers?
Most often the veneer is not well adapted at the edge next to the gum. When the seal is not perfect, the gum becomes inflamed, turns red, bleeds or causes bad breath.
▸Which veneer material is best?
Ceramic is the best material: it does not change color, it does not become porous and it is more resistant to fracture. The choice depends on your case and your budget, and in all three techniques what matters most is the seal, the polish and the shine.
▸Is a smile makeover always the right choice?
No. If your teeth are healthy and what is missing is alignment, sometimes the best option is to align and whiten them, without cutting a single tooth.

Dra. Carolina Macareno
Rehabilitadora Oral · Especialista en Implantes
Oral Rehabilitation specialist from Universidad CES. Over 17 years transforming smiles in Medellín, Colombia.
Dr. Carolina Macareno, oral rehabilitation specialist in MedellínTransform your smile
Smile design per arch of 10 teeth from $4,800 USD in lab-made composite and from $6,500 in ceramic.
Found this useful? Add me as a preferred source and you will see more of my answers when you search Google about your teeth.
Add as a preferred source on Google